Netgear M5300-28GF3 Web Management User Guide - Page 322
MLD Routing Interface Configuration, Query Max Response Time
View all Netgear M5300-28GF3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 322 highlights
ProSafe M5300 Switch MLD Routing Interface Configuration To display the MLD Routing Interface Configuration page, click Routing IPv6 Multicast MLD Routing Interface Configuration. To configure per-interface MLD settings: 1. Use Interface to select the interface for which data is to be configured or displayed. 2. Use Admin Mode to set the administrative status of MLD on the selected interface. The default value is disable. 3. Use Version to enter the version to be configured on the selected interface. Valid values are(1 to 2). The default value is 2. 4. Use Query Interval to enter the frequency in seconds at which MLD host-query packets are to be transmitted on this interface. Valid values are from 1 to 1800. The default value is 125. 5. Use Query Max Response Time to enter the maximum query response time to be advertised in MLDv2 queries on this interface, in milliseconds. Valid values are from 0 to 65535. The default value is 10000 milliseconds. 6. Use Robustness to specify the robustness parameter for the selected interface. This variable allows tuning for the expected packet loss on a subnet. If a subnet is expected to be lossy, the robustness variable may be increased. MLD is robust to (robustness variable-1) packet losses. 7. Use Startup Query Interval to specify the value that indicates the configured interval (in seconds) between General Queries sent by a Querier on startup. Routing 322