Netgear M5300-28GF3 Web Management User Guide - Page 35
SNTP Global Configuration, System, Management > Time
View all Netgear M5300-28GF3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
ProSafe M5300 Switch The device can poll Unicast server types for the server time. Polling for Unicast information is used for polling a server for which the IP address is known. SNTP servers that have been configured on the device are the only ones that are polled for synchronization information. T1 through T4 are used to determine server time. This is the preferred method for synchronizing device time because it is the most secure method. If this method is selected, SNTP information is accepted only from SNTP servers defined on the device using the SNTP Server Configuration page. The device retrieves synchronization information, either by actively requesting information or at every poll interval. SNTP Global Configuration Use the SNTP Global Configuration page to enable the SNTP client on the device and to configure the SNTP client settings. Enabling and configuring the SNTP client allows the device to synchronization the system time with a valid SNTP server on the network. To display the SNTP Global Configuration page, click System Management > Time SNTP Global Configuration. Configuring System Information 35