Netgear M5300-28GF3 Web Management User Guide - Page 432
Captive Portal User Configuration, CP User Configuration.
View all Netgear M5300-28GF3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 432 highlights
ProSafe M5300 Switch Captive Portal User Configuration When you click Add from the CP User Configuration page, the screen refreshes, and you can add a new user to the Local User database. To display the Captive Portal User Configuration page, click Security Control> Captive Portal CP User Configuration. 1. User ID identifies the name of the user. 2. Use User Name to enter the name of the user. Name can contain 1 to 31 alphanumeric characters. User names once created cannot be changed/modified. 3. Set Edit Password to "Enable" only when you want to change the password. The default value is "Disable". 4. Use Password to enter a password for the user. The password length can be from 8 to 64 characters. 5. Use Confirm Password to enter the password for the user again. 6. Use Group to assign the user to at least one User Group. To assign a user to more than one group, press the Ctrl key and click each group. New users are assigned to the 1-Default user group by default. 7. Use Session Timeout to enter the number of seconds a user is permitted to remain connected to the network. Once the Session Timeout value is reached, the user is logged out automatically. A value of 0 means that the user does not have a Session Timeout limit. The valid range is 0 to 86400 seconds and the default value is 0. 8. Use Idle Timeout to enable Logout once idle time-out is reached (seconds). If the attribute is 0 or not present then use the value configured for the captive portal. 9. Use Max Bandwidth Down to specify the maximum rate (Rate in bits per seconds) at which a client can receive data from the network. 0 indicates use global configuration (Range: 0 - 536870911 bps.) Managing Device Security 432