Netgear M5300-28GF3 Web Management User Guide - Page 79
CANCEL, RESET, to redisplay the with the latest status values from the switch.
View all Netgear M5300-28GF3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
ProSafe M5300 Switch 4. Click CANCEL to abandon the changes. 5. Click RESET to redisplay the page with the latest status values from the switch. The NSF Summary page includes the following non-configurable information: Field Description Operation Status Indicates whether NSF is operational on the stack, which may differ from the Admin Status setting. If a unit that does not support NSF is connected to the stack, then NSF is disabled on all stack members. When a unit that does not support NSF is disconnected from the stack and all other units support NSF, and NSF is administratively enabled, then NSF operation resumes. Last Startup Reason The type of activation that caused the software to start the last time. The possible values are: • Power On-The switch rebooted, caused by a power cycle or an administrative "Reload" command. • Administrative Move- The administrator issued a command for the stand-by manager to take over. • Warm Admin Move-The administrator issued a command for the backup manager to take over. • Warm-The primary management card restarted due to a failure, and the system executed a nonstop forwarding failover to a backup management unit. • Auto Cold-The system switched from the active manager to the backup manager and was unable to maintain user data traffic. This is usually caused by multiple failures occurring close together. Time Since Last Restart Time since the current management card became the active management card. For the backup management unit, the value is set to 0d 00:00:00. Restart In Progress Indicates whether a restart is in progress. A restart is not considered complete until all hardware tables have been fully reconciled. Warm Restart Ready Indicates whether the initial full checkpoint has finished. Backup Configuration Age Indicates the time since the running configuration was last copied to the backup unit. Configuring System Information 79