Netgear MBR1200 MBR1200 User Manual - Page 28
Configuring WEP, Logging In to Your Router, WPA2, or WPA + WPA2
View all Netgear MBR1200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Mobile Broadband 11n Wireless Router MBR1000 User Manual Table 6. Wireless Settings (Continued) Settings Security Options None WEP WPA-PSK (TKIP) WPA2-PSK (AES) WPA-PSK (TKIP) + WPA2-PSK (AES) Description You can use this setting to establish wireless connectivity before implementing wireless security. NETGEAR strongly recommends that you implement wireless security. Use encryption keys and data encryption for data security. You can select 64-bit or 128-bit encryption. See Configuring WEP on page 28. Allow only computers configured with WPA to connect to the router. See Configuring WPA, WPA2, or WPA + WPA2 on page 29. Allow only computers configured with WPA2 to connect to the router. See Configuring WPA, WPA2, or WPA + WPA2 on page 29. Allow computers configured with either WPA-PSK or WPA2-PSK security to connect to the router. See Configuring WPA, WPA2, or WPA + WPA2 on page 29. Configuring WEP Note: If you use a wireless computer to configure wireless security settings, you will be disconnected when you click Apply. Reconfigure your wireless computer to match the new settings, or access the router from a wired computer to make further changes. To configure WEP data encryption: 1. Log in to the router as described in Logging In to Your Router on page 11. 2. From the main menu, select Wireless Settings to display the Wireless Settings screen. 28 | Chapter 2: Wireless Network Configuration