Netgear MBR1200 MBR1200 User Manual - Page 34
Keep Wireless Settings, Apply, WPS Button, WPS PIN Entry
View all Netgear MBR1200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Mobile Broadband 11n Wireless Router MBR1000 User Manual • Change the wireless network name (SSID) to a meaningful name. • On the WPA/PSK + WPA2/PSK screen, select a passphrase. • Make sure that the Keep Wireless Settings check box is selected in the WPS Settings screen so that your new settings will not be erased if you use WPS. 4. Click Apply so that your changes take effect. Write down your settings. All existing wireless clients are disassociated and disconnected from the router. 5. For the non-WPS devices that you want to connect, open the networking utility and follow the utility's instructions to enter the security settings that you selected in Step 3 (the SSID, WPA/PSK + WPA2/PSK security method, and passphrase). 6. For the WPS devices that you want to connect, follow the procedure WPS Button on page 31 or WPS PIN Entry on page 32. The settings that you configured in Step 3 are broadcast to the WPS devices so that they can connect to the router. 34 | Chapter 2: Wireless Network Configuration