Netgear MP115 MP115 User Manual - Page 36
Available Wireless Networks, Adding a New Network
![]() |
View all Netgear MP115 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
User's Manual for the Wireless Digital Media Player MP115 1. Push the Settings button on the remote. 2. Select Network, and then select IP Address. The screen shows DCHP and Static. The MP115 ships set up to use DCHP. 3. Select an option and view the IP Address, Subnet Mask, Network Type, and Network Name. Available Wireless Networks 1. Push the Settings button on the remote. 2. Select Network, and then select Wireless. 3. Select Available Networks. The screen shows the following information about the available networks: • Name: The Network Name (SSID) • Channel: The channel that the wireless access point is using. • Mode: AP (Access Point) is the normal setting. • Security: The default is Disabled. • Signal: Good, fair, or poor. 4. If you want to change to another network, select the network. Note: Networks that do not broadcast their SSID may not appear on this screen. For information about working with hidden networks see "Hidden Networks" on page 5-3. Also see "Wireless Link" on page 6-2. 5. Select Apply and push OK. Adding a New Network 1. Push the Settings button on the remote. 2. From the Settings menu, select Wireless. 3. Select New/Hidden Networks. You are prompted to enter your wireless network SSID (up to 32 characters). 4. Enter the network name (SSID), select Next and push OK 5. Select New for the network type. 6. Select the security level. 5-2 Settings and Maintenance November 2004 202-10038-01
![](/manual_guide/products/netgear-mp115-mp115-user-manual-d74d2e4/36.png)