Netgear PS111W PS111W Installation Guide - Page 8

Install the Print Server You can place the print server on a desktop or any flat surface. To save work space, you can also mount the print server with Velcro strips on the side of a printer. Connect the Printer Cables Connect a cable (not provided) from the printer to the parallel PRINTER port on the print server. If you are connecting one printer to the Model PS110 Print Server, you can use either of the ports. Connect the Network Cables Using the 10BASE-T Network Ports Use the following table for setting the push button switch and for selecting either a crossover or straight-through cable when connecting the print server to other devices. Connecting Network Port Model PS104 Print Server Port 1 set to Uplink Port 1 set to Normal Ports 2 through 4 Model PS105 Print Server Port 2 set to Uplink Port 2 set to Normal Ports 3 through 5 Model PS110 Print Server Connecting Device Cable Used Hub or switch PC or router PC or router Straight-through cable Straight-through cable Straight-through cable Hub or switch PC or router PC or router Hub or switch PC Straight-through cable Straight-through cable Straight-through cable Straight-through cable Crossover cable Note: Ethernet specifications limit the twisted pair cable (called a twisted pair segment) extended from a network port to 100 meters in length. Model PS104/PS105/PS110 Print Server Installation Guide