Netgear RN51661E Software Manual - Page 109
ReadyNAS OS 6.1, A pop-up screen displays., Con the settings as explained in the following table
View all Netgear RN51661E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
ReadyNAS OS 6.1 A pop-up screen displays. 3. Configure the settings as explained in the following table: Item Description Name The name is provided for information only and cannot be changed. Target The target is the address that an iSCSI client (that is, an initiator) needs to access the LUN group. The Target field is automatically populated, but you can delete the content and then replace the content with a custom target address. Require initiators to identify themselves using CHAP Select this check box to enable CHAP authentication and to allow only authenticated initiators access to the LUN group. By default, access to the LUN group is open to the initiators that you add to list of initiators (see Add an iSCSI Initiator on page 110). Allowed Initiators Select one of the following radio buttons: • Any. Access to the LUN group is granted to all initiators that have information about the target address. (If CHAP authentication is enabled, access is dependent on CHAP authentication.) • Selected. Access to the LUN group is granted to iSCSI qualified names (IQNs) only. (If CHAP authentication is enabled, access is dependent on CHAP authentication.) For more information about configuring iSCSI initiators, see the following sections: • Add an iSCSI Initiator on page 110 • Remove an iSCSI Initiator on page 112 • Edit the CHAP Password on page 113 LUNs 109