Netgear RN51661E Software Manual - Page 23
Change RAID Mode, Change from X-RAID2 to Flex-RAID
View all Netgear RN51661E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
ReadyNAS OS 6.1 Change RAID Mode You can change the RAID mode that your ReadyNAS storage system uses. By default, your system's hard disks are configured into a single X-RAID2 volume. Change from X-RAID2 to Flex-RAID Your ReadyNAS system can easily change a volume from X-RAID2 to Flex-RAID mode. Data on the X-RAID2 volume is preserved when you switch to Flex-RAID. The RAID level of the resulting Flex-RAID volume is automatically assigned based on the number of disks that are installed. To change from X-RAID2 to Flex-RAID: 1. Select System > Volumes. 2. Click the X-RAID button at the right side of the screen. 3. Confirm that you want to switch from X-RAID2 to Flex-RAID. The volume switches from X-RAID2 mode to Flex-RAID mode and the indicator on the X-RAID button turns gray. The RAID level is automatically assigned based on the number of disks that are installed. Volume Configuration 23