Netgear RN528X00 Hardware Manual - Page 136
Table 16. Indicator descriptions ReadyNAS 526X and 626X Continued, NETGEAR ReadyNAS 526X and 626X,
View all Netgear RN528X00 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 136 highlights
ReadyNAS OS 6 Desktop Storage Systems Table 16. Indicator descriptions ReadyNAS 526X and 626X (Continued) Indicator Description Model RN626X only: Two LED status indicators are built into each 1G Ethernet port. One LED is a bicolor LED that can light solid amber or solid green and indicates the port speed. The other Rear panel 1G Ethernet LAN LED is green and indicates the link (solid green) and activity (blinking green). These port LEDs LEDs indicate port speed and activity as follows: • Bicolor LED green, green LED solid. 1 Gbps connection speed, no activity. • Bicolor LED green, green LED blinking. 1 Gbps connection speed, activity. • Bicolor LED amber, green LED solid. 100 Mbps connection speed, no activity. • Bicolor LED off, green LED off. Either no connection or 10 Mbps connection without activity. • Bicolor LED off, green LED blinking. 10 Mbps connection, activity. Rear panel 10G Ethernet LAN port LEDs Two LED status indicators are built into each 10G Ethernet port. One LED is a bicolor LED that can light solid amber or solid green and indicates the port speed. The other LED is green and indicates the link (solid green) and activity (blinking green). These LEDs indicate port speed and activity as follows: • Bicolor LED green, green LED solid. 1 Gbps connection speed, no activity. • Bicolor LED green, green LED blinking. 1 Gbps connection speed, activity. • Bicolor LED amber, green LED solid. 10 Gbps connection speed, no activity. • Bicolor LED amber, green LED blinking. 10 Gbps connection speed, activity. • Bicolor LED off, green LED off. No connection. Power On and Shut Down This section describes how to power on and shut down your system. If you must shut down the system, use one of the preferred shutdown methods whenever possible. Power On When you connect the system to a power supply and the Power switch is in the On position or the system recovers from a power outage and the Power switch is in the On position, the following occurs: • The system automatically powers on if you enabled the Wake on LAN (WoL) feature or scheduled the system to automatically power on or off. • The system returns to its last state if the Wake on LAN (WoL) feature is disabled and you did not schedule the system to automatically power on or off: NETGEAR ReadyNAS 526X and 626X 136