Netgear RN528X00 Hardware Manual - Page 153

ReadyNAS OS 6 Desktop Storage Systems Table 18. ReadyNAS 716X indicator descriptions (Continued) Indicator Description Rear panel Ethernet port Two LED status indicators are built into this port. They indicate port speed and activity LEDs (10 Gb) as follows: • LED 1 Off. No link. Solid green. Linked. Blinking green. Activity. • LED 2 Solid green. 10 GbE. Solid yellow. 1 GbE. Off. 100 Mbps. Status display screen Displays messages about the status of your storage system. Note that the status display screen goes to sleep to prevent burn-in. To wake the status display screen, activate the proximity sensor, press the touch pad, press the OK button, or press the Power button once. If the storage system reports an abnormal operation or error, the status display screen stays on. Power On and Shut Down This section describes how to power on and shut down your system. If you must shut down the system, use one of the preferred shutdown methods whenever possible. Power On When you connect the system to a power supply and the Power switch is in the On position or the system recovers from a power outage and the Power switch is in the On position, the following occurs: • The system automatically powers on if you enabled the Wake on LAN (WoL) feature or scheduled the system to automatically power on or off. • The system returns to its last state if the Wake on LAN (WoL) feature is disabled and you did not schedule the system to automatically power on or off: NETGEAR ReadyNAS 716X 153