Netgear WAG302v2 WAG302v2 Reference Manual - Page 30
Basic IP Settings, main menu. - password
View all Netgear WAG302v2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
NETGEAR ProSafe Dual Band Wireless Access Point WAG302v2 Reference Manual 4. Log on by using the default user name of admin and default password of password. After you log on, the Web browser displays the General Information page as shown in Figure 2-1 on page 2-4. Basic IP Settings To configure the basic settings of your wireless access point: 1. Connect to the WAG302v2 and click Basic Settings in the Setup section of the WAG302v2 main menu. Figure 2-5 shows the Basic Settings page. Rest of World Figure 2-5 US Only 2. Enter the Basic Default Settings. The Basic Settings default settings below work for most users and situations: 2-8 Basic Installation and Configuration v1.0, May 2006
NETGEAR ProSafe Dual Band Wireless Access Point WAG302v2 Reference Manual
2-8
Basic Installation and Configuration
v1.0, May 2006
4.
Log on by using the default user name of
admin
and default password of
password
.
After you log on, the Web browser displays the General Information page as shown in
Figure 2-1 on page 2-4
.
Basic IP Settings
To configure the basic settings of your wireless access point:
1.
Connect to the WAG302v2 and click Basic Settings in the Setup section of the WAG302v2
main menu.
Figure 2-5
shows the Basic Settings page.
2.
Enter the Basic Default Settings. The Basic Settings default settings below work for most
users and situations:
Figure 2-5
US Only
Rest of World