Netgear WAG302v2 WAG302v2 Reference Manual - Page 44
Select the Turn Access Control On check box., device you want to add to the list.
View all Netgear WAG302v2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
NETGEAR ProSafe Dual Band Wireless Access Point WAG302v2 Reference Manual 2. From the Security menu, click the Access Control link to display the Access Control menu shown in Figure 2-9. Figure 2-9 3. Select the Turn Access Control On check box. Note: When configuring the WAG302v2 from a wireless computer whose MAC address is not in the access control list, if you select Turn Access Control On, you will lose your wireless connection when you click Apply. You must then access the wireless access point from a wired computer or from a wireless computer which is on the access control list to make any further changes. 4. Either select from the list of available wireless stations the WAG302v2 has found in your area, or enter the MAC address for a device you plan to use. You can usually find the MAC address of a wireless station printed on the wireless adapter. Click Add to add the wireless device to the access list. Repeat these steps for each additional device you want to add to the list. 2-22 v1.0, May 2006 Basic Installation and Configuration