Netgear WAG302v2 WAG302v2 Reference Manual - Page 98
Viewing and Configuring Management Settings, Reboot the System.
View all Netgear WAG302v2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
NETGEAR ProSafe Dual Band Wireless Access Point WAG302v2 Reference Manual Viewing and Configuring Management Settings The commands in Table C-12 correspond to the pages on the Web UI under the Management heading. This section includes commands for the following features: • Change Password • Remote Management • Upgrade Firmware • Backup and Restore • Reboot the System. Table C-12 AP Management Task Command Set a password for admin access to the AP. Enable Remote CLI Access set system password set ssh status up Disable Remote CLI Access set ssh status down Enable SNMP set snmp status up Disable SNMP set snmp status down Set a Public Community name set snmp ro-community Set a Private Community name Set an IP address to receive SNMP traps Upgrade the firmware (requires a reboot) set snmp rw-community set traphost host firmware-upgrade Example: firmware-upgrade tftp://1.2.3.4/upgrade.tar firmware-upgrade file://1.2.3.4/tmp/upgrade.tar Backup the configuration file config download Example: config download tftp://1.2.3.4/defaultcfg.xml Restore the configuration file config upload Example: config upload tftp://1.2.3.4/defaultcfg.xml C-14 v1.0, May 2006 Command Line Reference