Netgear WG602v1 WG602v1 User Manual - Page 10
Protecting Your Wireless Network - manual
View all Netgear WG602v1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Configuration RTS Threshold Fragmentation Length Preamble Type DTIM Description Request to Send Threshold. The packet size that is used to determine if it should use the CSMA/CD (Carrier Sense Multiple Access with Collision Detection) mechanism or the CSMA/CA mechanism for packet transmission. With the CSMA/CD transmission mechanism, the transmitting station sends out the actual packet as soon as it has waited for the silence period. With the CSMA/CA transmission mechanism, the transmitting station sends out an RTS packet to the receiving station, and waits for the receiving station to send back a CTS (Clear to Send) packet before sending the actual packet data. Default: 2346 This is the maximum packet size used for fragmentation. Packets larger than the size programmed in this field will be fragmented. The Fragment Threshold value must be larger than the RTS Threshold value. Default: 2346 A long transmit preamble may provide a more reliable connection or slightly longer range. A short transmit preamble gives better performance. Default: Long The Delivery Traffic Indication Message specifies the data beacon rate between 1 and 16384. Default: 1 Security Configuration To prevent unauthorized wireless stations from accessing data transmitted over the network, the Security Settings screen of the Access Point Setup offers use of an authentication protocol as well as data encryption, known as WEP (Wired Equivalent Privacy). For a step-by-step treatment of security setup, see Enabling Basic Wireless Access Security Features on page 18. 1. Use a browser to connect to the WG602. 2. Click Security Settings on the Access Point Setup menu and log in. 17 3. Choose your authentication method. To set authentication for WG602 Wireless Access Point, select the Open System or Shared Key Authentication Type by selecting the radio button. All other devices using this band must share this setting. Shared Key operation offers an increase in security over an Open System operation. 4. Setup 802.11b/g WEP encryption security as needed. For 802.11b/g, all four keys must have the same encryption level - 64-bit or 128-bit. All devices in the network must have the same key values in for the selected encryption key. The encryption key selected as the default determines the encryption level at which the access point is transmitting. For 64-bits encryption: Hexadecimal: 10 hexadecimal digits in the range of "A-F", "a-f" and "0-9" (e.g. 11AA22BB33). For 128-bits encryption: Hexadecimal: 26 hexadecimal digits in the range of "A-F", "a-f" and "0-9" (e.g. 00112233445566778899AABBCC). Passphrase: You can enter a Passphrase to avoid manually entering WEP keys. It is case-sensitive. 5. When you are done, click the Apply button and then the Reboot button for the changes to take effect. 3 Protecting Your Wireless Network The absence of a physical connection between nodes makes wireless links vulnerable to information theft. This chapter describes how to use the basic security features of the WG602 Wireless Access Point to protect your network. Although your network traffic may already be encrypted, the security steps described here are easy to perform. Enabling Basic Wireless Access Security Features There are several steps you can take to secure your wireless network: • Change the factory default administrator password of the WG602. • Place the WG602 in a location where it cannot be physically tampered with. 18