Netgear WG602v1 WG602v1 User Manual - Page 2

System Requirements, Introduction, Package Contents - update

Page 2 highlights

Introduction Thank you for purchasing the NETGEAR WG602 54 Mbps Wireless Access Point. The NETGEAR WG602 Wireless Access Point connects to all existing 802.11b wireless networks and supports new clients based on the forthcoming ultra-fast 802.11g standard at 54 Mbps all in the same 2.4 GHz radio frequency range. Package Contents This package should contain: • WG602 Wireless Access Point • Power adapter and cord (12VDC, 1.2A) • NETGEAR's WG602 Resource CD • WG602 User's Guide • Straight-through Category 5 Ethernet cable-5 feet (1.52 m) • Support information card • Warranty card WG602 54 Mbps Wireless Access Point Model WG602 Resource CD, User's guide, Support information card, Warranty card Stand 1 Power adapter Category 5 100 Mbps Ethernet cable You can refer to the Support information card for the telephone number of customer support in your area. You should keep the Support information card, along with the original packing materials, and use the packing materials to repack the WG602 54 Mbps Wireless Access Point if you need to return it for repair. To qualify for product updates and product warranty registrations, we encourage you to register on the NETGEAR's web page at: http://www.NETGEAR.com. System Requirements Before installing the WG602, your system should meet the following requirements: • A Cable/DSL Router with multiple 10/100 Mbps Ethernet Ports or a 10/100 Mbps Local Area Network device such as a hub or switch. Note: The WG602 will need to be connected to a router, switch, or hub as shown in the picture below. • A Category 5 UTP straight-through Ethernet cable with the RJ-45 connector (included in this package or one similar to it). • An A/C power outlet (100-240 V, 50-60 HZ). • A Web browser for configuration, such as Microsoft® Internet Explorer 5.0 or above, or Netscape Navigator® 4.78 or a later version. • One computer with TCP/IP protocol installed. • Other 802.11b or 802.11g-compliant devices, such as the NETGEAR WAB501 Dual Band Wireless PC Card or WG511 54 Mbps Wireless PC Card. + 12 VDC 1.2A WG602 54 Mbps Wireless Access Point Cable/DSL Router Wire3l2-ebsitsCaPrdCBuCsaWrGd511 WG511 54 Mbps Wireless PC Card in a Notebook computer Cable or DSL modem 2

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15

You can refer to the Support information card for the telephone number of customer support
in your area. You should keep the Support information card, along with the original packing
materials, and use the packing materials to repack the WG602
54 Mbps Wireless Access Point
if you need to return it for repair.
To qualify for product updates and product warranty registrations, we encourage you to register
on the NETGEAR’s web page at:
.
System Requirements
Before installing the WG602, your system should meet the following requirements:
A Cable/DSL Router with multiple 10/100 Mbps Ethernet Ports or a 10/100 Mbps Local
Area Network device such as a hub or switch.
Note:
The WG602 will need to be connected to a router, switch, or hub as shown in the
picture below.
A Category 5 UTP straight-through Ethernet cable with the RJ-45 connector (included in
this package or one similar to it).
An A/C power outlet (100-240 V, 50-60 HZ).
A Web browser for configuration, such as Microsoft
®
Internet Explorer 5.0 or above, or
Netscape Navigator
®
4.78 or a later version.
One computer with TCP/IP protocol installed.
Other 802.11b or 802.11g-compliant devices, such as the NETGEAR WAB501 Dual
Band Wireless PC Card or WG511 54 Mbps Wireless PC Card.
Cable or DSL modem
Cable/DSL
Router
WG602
54 Mbps
Wireless Access Point
12 VDC 1.2A
+
WG511 54 Mbps
Wireless PC Card in a
Notebook computer
Wireless PC Card
2
Introduction
Thank you for purchasing the NETGEAR
WG602
54 Mbps Wireless Access Point
. The
NETGEAR WG602 Wireless Access Point connects to all existing 802.11b wireless networks
and supports new clients based on the forthcoming ultra-fast 802.11g standard at 54 Mbps all
in the same 2.4 GHz radio frequency range.
Package Contents
This package should contain:
WG602 Wireless Access Point
Power adapter and cord (12VDC, 1.2A)
NETGEAR
s WG602 Resource CD
WG602 User's Guide
Straight-through Category 5 Ethernet cable
5 feet (1.52 m)
Support information card
Warranty card
Model WG602 Resource CD,
User's guide, Support
information card,
Warranty card
Power adapter
Category 5
100 Mbps
Ethernet cable
Stand
WG602
54 Mbps Wireless
Access Point
1