Netgear WG602v1 WG602v1 User Manual - Page 13

Problem Cause Solution The Ethernet light The power light is • doesn't light up. lit, the Ethernet network cable is attached to the Ethernet port, but • the Ethernet light isn't lit. There is a possible hardware • connection problem. The other side of the Ethernet cable is not connected to a hub or switch, or the hub or switch is not powered on. Make sure the cables are inserted all the way - you should hear a click. The Ethernet cable is bad. Replace it with the one that came with the access point. You have the wrong cable between the router and the modem. Use the standard straight through or the cable that came with the access point. I cannot get onto You may not have • the Ethernet configured the network from the wireless wireless network. parameters of the computers with wireless adapters to be the same as the access point. Check the wireless configuration of the wireless adapters and access point through its Web-based interface from a computer connected to the Ethernet network. The Wireless Network Name (SSID), WEP and other settings need to be exactly the same for all computers and devices on the wireless network. 23 CE Declaration of Conformity For the following equipment: 54 Mbps Wireless Access Point (Product Name) 0768 ! WG602 (Model Designation) is herewith confirmed to comply with the requirements set out in the Council Directive on the Approximation of the Laws of the Member States related to Electromagnetic Compatibility (89/336/EEC), Low-voltage Directive (73/23/EEC) and the Amendment Directive (93/68/EEC). For the evaluation regarding the Directives, the following standards were applied: ETS 300 328:1996-11+A1:1997-07 ETX 300 826: 1997-11 EN60950:1992+A1:1993+A3:1995+A4:1996+A11:1997 Déclaration de conformité CE Il est certifié que l'équipement suivant : 54 Mbps Wireless Access Point (nom du produit) WG602 (deésignation du modele) 0768 ! est conforme aux exigences définies par la Directive du Approximation of the Laws of the Member States related to Electromagnetic Compatibility (89/336/EEC), Low-voltage Directive (73/23/EEC) and the Amendment Directive (93/68/EEC). For the evaluation regarding the Directives, the following standards were applied: ETS 300 328:1996-11+A1:1997-07 ETX 300 826: 1997-11 EN60950:1992+A1:1993+A3:1995+A4:1996+A11:1997 24