Netgear WGE101 WGE101 Reference Manual - Page 11
Use the following IP Address - manual
UPC - 606449029567
View all Netgear WGE101 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
9. Click OK twice to close the Network control panel and save any changes. 10. If you made a change, restart the computer. Note: After you've changed the settings on the bridge, you'll have to reset the TCP/IP Properties: IP Address tab values back to their original state. Windows 2000/XP 1. Right-click My Network Place and choose Properties. 2. Double-click Local Area Network Connection and click Properties. 3. Select Internet Protocol (TCP/IP) and click Properties. 4. If Obtain an IP address automatically is selected, select Use the following IP Address. OR If Use the following IP Address is selected, note the current IP address. 5. Change the IP address to 192.168.0.230. 6. Click OK twice and click Close to save any changes. 7. If you made a change, restart the computer. Note: After you've changed the settings on the bridge, you'll have to reset the Internet Protocol (TCP/IP) Properties dialog box back to its original state. Mac OS® 8.6 or 9.x 1. Choose Control Panels >TCP/IP from the Apple () menu. 2. If not already selected, select Ethernet in the Connect via list. 3. If Manually isn't selected in the Configure list, note the current selection and select Manually. OR If Manually is selected, note the current IP address. 4. Change the IP address to 192.168.0.230 and click the close box. 5. If asked, click Save. 9