Netgear WGE101 WGE101 Reference Manual - Page 15

10. To use the bridge with a different computer or other Ethernet-enabled device, return to Installing the WGE101 Bridge on page 4 to connect the bridge. Selecting a Specific Wireless Network On the Wireless Settings page, you can select a specific wireless network (SSID) and make other configuration changes. 1. Start your browser software. 2. Type http:// followed by the bridge's IP address as the web address and press Enter (or Return). Note: The default value is 192.168.0.201. If you've set the bridge to use DHCP, check the router table to find out what the current address is for the bridge. 3. Type admin as the User ID and type the current password. (password is the default password.) 4. Click OK. You'll see the Status page. 5. Click Wireless Settings. 6. To connect to a specific wireless router or access point, select the correct one from the SSID (Existing networks) list. 7. Click Apply. 8. Click OK. 9. Click Logout. Note: You may also select the SSID on the Wireless Network Available page instead of the Wireless Settings page. Changing the Bridge's Password 1. Start your browser software. 2. Type http:// followed by the bridge's IP address as the web address and press Enter (or Return). Note: The default value is 192.168.0.201. If you've set the bridge to use DHCP, check the router table to find out what the current address is for the bridge. 3. Type admin as the User ID and type the current password. (password is the default password.) 13