Netgear WGE101 WGE101 Reference Manual - Page 16
Enabling WEP Security - default ip
UPC - 606449029567
View all Netgear WGE101 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
4. Click OK. You'll see the Status page. 5. Click Change Password. 6. Type the old password in the Old Password box. 7. Type a new password in the New Password box. 8. Re-type the new password in the Confirm Password box. 9. Click Apply. 10. If you are through making changes, click Logout. Enabling WEP Security To prevent others from accessing your wireless network, you may enable WEP (Wired Equivalent Privacy) security on your wireless network. If you do so, you'll need to enable WEP security in all the devices. If you filled in the parameters on page 7, you may want to refer to that page before making any configuration change. Note: By default, WEP security is disabled. 1. Start your browser software. 2. Type http:// followed by the IP address for the bridge as the web address and press Enter (or Return). Note: The default value is 192.168.0.201. If you've set the bridge to use DHCP, check the router table to find out what the current address is for the bridge. 3. Type admin as the User ID and type the current password. (password is the default.) 4. Click OK. You'll see the Status page. 5. To change the WEP settings, click Wireless Settings. 6. Select Web Data Encryption to enable WEP security. 14