Netgear WGE101 WGE101 Reference Manual - Page 13
Using the NetBIOS Name - ip
UPC - 606449029567
View all Netgear WGE101 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
8. Click Apply. 9. Click Logout. 10. Restore the computer to its previous network settings. See Checking and Changing the Computer's IP Address on page 8 for details. 11. Make any other configuration changes. 12. If you want this bridge used elsewhere on your network, install it now. Note: If you have multiple WGE101 bridges in your network and want to use the default IP address of 192.168.0.201, only one bridge can use this default IP address. You'll have to create IP addresses for each bridge using 192.168.0.yyy, where yyy is a unique number for each device. Using the NetBIOS Name If you're familiar with using a device's NetBIOS name, you may use it in the Internet browser instead of the IP address to access the configuration software. The WGE101 NetBIOS name is netgearxxxx, where xxxx stands for the last four digits of the WGE101 MAC address, which is found on the bridge's label. 11