Netgear WMS5316 WMS5316 Reference Manual - Page 19
Syslog Settings, Syslog Server IP Address
UPC - 606449068436
View all Netgear WMS5316 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
ProSafe 16 AP Wireless Management System WMS5316 Reference Manual • Start IP: Enter the starting IP address of the range that can be assigned by the DHCP Server. • End IP: Enter the ending IP address of the range that can be assigned by the DHCP Server. • Use Default DNS Server checkbox: This option allows the Wireless Management System DNS server to be provided to the clients of the specified VLAN. • Primary DNS Server: Enter the IP address of the primary DNS server for the network. • Secondary DNS Server: Enter the IP address of the secondary DNS Server for the network. • DHCP Server List: This displays DHCP server configuration for all configured VLANs. Syslog Settings This page lets you configure the settings to connect to a Syslog server, if you have one configured in your network. Click the Config tab and select System > Advanced. Figure 1-7 • Enable Syslog: Enable the Syslog settings, if you have a Syslog server on your network. • Syslog Server IP Address: Enter the IP address to which the Wireless Management System and managed access points will send all SysLogs, if the SysLog option is enabled. • Server Port Number: Enter the port number at which your Syslog server is configured to listen to requests. Getting Started 1-9 v1.0, March 2010