Netgear WMS5316 WMS5316 Reference Manual - Page 69
Backing up Configuration Settings, Browse, Upload
UPC - 606449068436
View all Netgear WMS5316 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
ProSafe 16 AP Wireless Management System WMS5316 Reference Manual 3. If not done automatically, uncompress the downloaded file. If included, read the Release Notes before continuing. 4. On the Maintenance tab select Upgrade > Access Point Upgrade: Figure 7-12 5. Make sure that status of the managed access point to be upgraded is healthy. Select the managed access point model from the drop-down list; only models of managed access points are in this list. 6. Click Browse. 7. Locate and select the file you just downloaded. 8. Click Upload to send the software to the access point. This loads the new software into the access point and causes the access point to restart. Note: Do not try to go online, turn off the access point, shutdown the computer or the Wireless Management System or do anything else to the access point or the Wireless Management System until the access point finishes restarting! When the Test light turns off, wait a few more seconds before doing anything. 9. Check the firmware version on upgrade page to verify that your access point now has the new software installed. Backing up Configuration Settings Once you have the Wireless Management System working properly, you should back up the information to have it available if something goes wrong. When you back up the settings, they are saved as a file on your computer. Maintenance v1.0, March 2010 7-11