Netgear WMS5316 WMS5316 Reference Manual - Page 56
Editing Access Point Information, Model, User Name - authentication failure
UPC - 606449068436
View all Netgear WMS5316 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
ProSafe 16 AP Wireless Management System WMS5316 Reference Manual the Edit page for each access point to change its IP settings, VLAN settings, and password. Table 6-1. Status Field Definitions Status Connected Authentication Failure Not Connected Implies How to Correct Normal operation. The Wireless N/A Management System is able to contact the access point and manage it. The password configured during synchronization from the Wireless Management System is not the same as the password of the access point. Select the access point and click Edit. In the Edit page, configure the correct password of the access point and click Apply. The Wireless Management System will try synchronization again with the access point. The Wireless Management The Wireless Management System tries to log in System cannot connect to the to managed access points every 1 minute. If the access point with the configured IP error is temporary, then the status will address. automatically change to connected. If the error is prolonged, verify the access point IP address and network connectivity. Editing Access Point Information Figure 6-2 • Name: The unique name of managed access point. • Model: The access point model. The field cannot be modified; it is set when the access point is added to the list. • User Name: The user name for logging in to the access point. This field is not modifiable. 6-2 Configuring Access Point Groups v1.0, March 2010