Netgear WN311B-100NAS User Manual - Page 16

NETGEAR RangeMax NEXT Wireless PCI Adapter WN311B User Manual Smart Wizard Status Bar The status bar is located at the bottom of the Settings page. Channel Security Throughput Wireless network Signal strength Join a Network Figure 1-1 Wireless network Security Channel Throughput Signal strength Join a Network Connection status Connection status Understanding the Status Bar Identifies which wireless network you have joined. • Locked: security enabled. • Unlocked: security not enabled. The wireless channel used by the network. If many wireless networks in your area use the same channel they can interfere with one another. • Wireless throughput measured in Mega bits per second. To optimize throughput, connect to a network with a high-speed router or access point, and a high-speed Internet connection. See Chapter 3, "Wireless Network Performance". • If your computer has a USB v1.1 port, the WN311B is limited to that port's maximum speed, which is 14 Mbps. More dots indicates a stronger signal. Usually, you will experience higher throughput when the signal is strongest. Click Join a Network to open the Connection Wizard. Identifies the status of your network connection. • Connected to Internet: Wireless Internet connection is OK. • Connected to Router: Wireless connection to the router is OK but the router is not connected to the Internet. • 169.254.x.x or The wireless connection to the router is OK but there is a problem with the router. See Chapter 4, "Troubleshooting". 1-4 Basic Setup v1.0, October 2008