Netgear WN311B-100NAS User Manual - Page 31
Removing the WN311B Software in Internet Networking and TCP/IP Addressing: in, Appendix B
View all Netgear WN311B-100NAS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
NETGEAR RangeMax NEXT Wireless PCI Adapter WN311B User Manual c. This will cause a continuous ping to be sent to the device with the 192.168.0.1 static IP address. The ping response should change to "reply." Figure 2-11 At this point the connection is established. Note: If you cannot connect, see "Removing the WN311B Software" in Chapter 1. For problems with accessing network resources, the Windows Client and File and Print Sharing software might not be installed and configured properly on your computers. See the link to "Internet Networking and TCP/IP Addressing:" in Appendix B. To start a Computer-to-Computer (Ad Hoc) Network Connection: 1. On the Settings tab page of the Smart Wizard, select or type the Network Name (SSID). 2. Select the Computer-to-Computer (Ad Hoc) network type. 3. Click Initiate Ad Hoc. The Ad Hoc Setting dialog box opens: Figure 2-12 4. In the Start Ad Hoc field, choose the wireless standard (802.11a, 802.11b, or 802.11g) for your Ad Hoc computer-to-computer network. 5. In the Channel field, Automatic should work. If there are interference problems with another nearby wireless device, select a channel that is not being used by other wireless networks near your wireless adapter. Use the Networks tab to view channels in use in your area. Network Connections and Wireless Security v1.0, October 2008 2-13