Netgear WNR2500 User Manual - Page 112
IPv6 PPPoE, Apply, To set up a PPPoE IPv6 Internet connection, ADVANCED > Advanced Setup > IPv6
View all Netgear WNR2500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 112 highlights
N450 Wireless Router WNR2500 which is also indicated by the underline (_) under the IPv6 address. If no address is acquired, the field displays Not Available. 3. (Optional) In the DHCP User Class (If Required) field, enter a host name. Most people do not need to fill in this field, but if your ISP has given you a specific host name, enter it here. 4. (Optional) In the Domain Name (If Required) field, enter a domain name. You can type the domain name of your IPv6 ISP. (Do not enter the domain name for the IPv4 ISP here.) For example, if your ISP mail server is mail.xxx.yyy.zzz, you would type xxx.yyy.zzz as the domain name. If your ISP provided a domain name, type it in this field. (For example, Earthlink Cable might require a host name of home, and Comcast sometimes supplies a domain name.) 5. Configure the LAN setup and IPv6 filtering settings as explained in Step 3 through Step 5 of the procedure to set up an IPv6 Internet connection through auto detection (see IPv6 Auto Detect on page 105). 6. Click the Apply button. IPv6 PPPoE To set up a PPPoE IPv6 Internet connection: 1. Select ADVANCED > Advanced Setup > IPv6. The IPv6 screen displays. 2. In the Internet Connection Type list, select PPPoE. The screen adjusts: Advanced Settings 112