Netgear WNR2500 User Manual - Page 53
Set Up Address Reservation, Use Router as DHCP Server, Apply, To reserve an IP address
View all Netgear WNR2500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
N450 Wireless Router WNR2500 The LAN Setup screen displays. 2. Clear the Use Router as DHCP Server check box. 3. Click the Apply button. If the DHCP service is not enabled on the router and no other DHCP server is available on your network, you must set your computers' IP addresses manually or your computers are not able to access the router. Set Up Address Reservation When you specify a reserved IP address for a computer or device on the LAN, that computer or device always receives the same IP address each time it accesses the router's DHCP server. Reserved IP addresses should be assigned to computers or servers that require permanent IP settings. To reserve an IP address: 1. Select ADVANCED > Setup > LAN Setup. The LAN Setup screen displays. 2. In the Address Reservation section of the screen, click the Add button. A screen similar to the following displays: 3. In the IP Address field, type the IP address to assign to the computer or server. (Choose an IP address from the router's LAN subnet, such as 192.168.1.x.) Tip: If the computer is already on your network, you can select the associated radio button in the Address Reservation Table. The computer's information is automatically copied into the IP Address, MAC Address, and Device Name fields. genie ADVANCED Home 53