Netgear WNR2500 User Manual - Page 28
Basic Wireless Settings, Use Computer MAC Address
View all Netgear WNR2500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
N450 Wireless Router WNR2500 your ISP primary DNS server. If a secondary DNS server address is available, enter it also. Router MAC Address. The Ethernet MAC address used by the router on the Internet port. Some ISPs register the MAC address of the network interface card in your computer when your account is first opened. They accept traffic only from the MAC address of that computer. This feature allows your router to use your computer's MAC address (this situation is also called spoofing or cloning). • Use Default Address. Use the default MAC address. • Use Computer MAC Address. The router captures and uses the MAC address of the computer that you are now using to configure the router. To configure the router, use the computer that is registered with the ISP. • Use This MAC Address. Enter the MAC address that you want to use. Basic Wireless Settings You can view or configure the wireless network setup. The router comes with preset WPA2-PSK security. This means that the WiFi network name (SSID), wireless network password (also referred to as the passphrase or network key), and security option (authentication and encryption protocol) are preset in the factory. You can find the preset SSID and password on the router label. The preset SSID and password are uniquely generated for every device to protect and maximize your wireless security. WARNING: NETGEAR recommends that you do not change your preset security settings. If you do decide to change your preset security settings, make a note of the new settings and store it in a safe place where you can easily find it. Note: If you use a wireless computer to change the wireless network name (SSID) or other wireless security settings, you are disconnected when you click the Apply button. To avoid this situation, use a computer with a wired connection to access the router. To view or change basic wireless settings: 1. Select BASIC > Wireless. genie BASIC Settings 28