Netgear WNR2500 User Manual - Page 92
the External Ending Port field., Ending Port field.
View all Netgear WNR2500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
N450 Wireless Router WNR2500 A screen similar to the following displays: 3. In the Service Name field, enter a descriptive name. 4. In the Protocol list, select the protocol. Select TCP, UDP, or TCP/UDP. If you are not sure, select TCP/UDP. 5. In the External Starting Port field, enter the beginning port number. • If the application uses a single port, enter the same port number in the External Ending Port field. • If the application uses a range of ports, enter the ending port number of the range in the External Ending Port field. 6. If the internal port numbers are the same as the external port numbers, select the Use the same port range for Internal port check box. If they are not, use the Internal Starting Port and Internal Ending Port fields to enter the port numbers. 7. In the Internal IP Address field, enter the IP address of your local computer that provides this service. You can also select a radio button for one of the devices in the list of attached devices to automatically place the IP address of the selected device in the Internal IP Address field. 8. Click the Apply button. The service is added to the table on the Port Forwarding / Port Triggering screen. Advanced Settings 92