Nikon 25047 User Manual - Page 54

Setting Shooting Menus-continued Shooting Mode LENS Optional lens converters for wideangle, telephoto and fisheye photography can be used with the COOLPIX995. A Slide Copy Adapter is also available. Each of these converter is adapted to a particular combination of settings, such as the Focus mode, Zoom position and Metering method. Normal Wide Adapter Telephoto 1 Telephoto 2 Fisheye 1 Fisheye 2 Slide Copy Adptr Normal setting Wideangle Converter setting 2x Telephoto Converter TC-E2 setting 3x Telephoto Converter TC-E3ED setting Fisheye Converter setting (Records a circular image.) Fisheye Converter setting (The corners of the rectangular image are included in image.) Slide Copy Adapter setting Option Wide Adapter Button locked Focal length Zooming *1 Widest angle Enabled after setting Telephoto 1 *1 Maximum telephoto Enabled after setting Telephoto 2 *1 Maximum telephoto Enabled after setting Fisheye 1*2 *3 *4 Widest angle Disabled Fisheye 2 *3 *4 Middle Disabled Slide Copy Adptr*5 *3 *4 Macro Enabled after setting *1 The built-in Speedlight is set to Flash Cancel. Only an optional external Speedlight can be fired. *2 The Focal length is fixed to infinity, the metering system to Center-Weighted and the range of selectable apertures is limited. *3 The Self-timer can be set. *4 Both the built-in Speedlight and any optional external Speedlight are set to Flash Cancel. *5 Less contrast is set for Image Adjustment and compensation of +0.7 EV is set. This can be changed after the setting is made. Swivel Lock The Swivel Lock function, prevents the lens section of the camera from being unintentionally swiveled beyond the horizontal position by the weight of an optional lens converter. Slide the Swivel Lock lever in the direction of the arrow to activate the Swivel Lock function and lock the lens section of the camera so that it cannot be rotated more than 90° forward (vertical position). 106 - Slide Copy Adapter - Select Slide Copy Adptr when the camera is attached to a Slide Copy Adapter to copy a 35mm type color slide film or check the images on negative film. Positive Inverse Color Setting for color slide film Setting for negative film Inverse color mode • Bright lighting is required in Inverse Color mode when checking negative film on a Slide Copy Adapter. If the lighting is insufficient, the image on the Monitor appears too bright. If the image is affected by noise (interference), set the Image Sharpening to Off or Low (p. 114). • Inverse Color mode is only intended for checking negative film, and Image quality varies significantly depending on the type or manufacturer of the film being used. To obtain high-quality images, use of a film scanner such as the Nikon COOLSCAN is recommended. Notes: Lens setting • The built-in Speedlight does not fire when the Lens settings is set to Fisheye 1, Fisheye 2 or Slide Copy Adptr. The Flash Cancel fi indication is displayed on the Control panel and Monitor. • Refer to the instruction manual for the optional lens converter or Slide Copy Adapter for details. • The Lens setting indication is displayed on the Monitor when a Lens setting other than Normal is selected. • When Fisheye 1 is selected, the Infinity √ and Center-Weighted Metering indications are also displayed on the Monitor. • When Slide Copy Adptr is selected, the Macro v and Less Contrast indications are also displayed on the Monitor. 107 Menus