Nikon 25047 User Manual - Page 78

Connecting to an AC Adapter (optional) The camera can be powered from AC electrical outlets rated at 100240 V 50/60Hz using the EH-21 AC adapter/battery charger (8.4V, 1.3A). 1 Open the DC-in connector cover as indicated. 2 Set the Mode dial to DC-in connector. 3 Plug in the adapter. , and connect the AC adapter plug to the Connecting to a television or VCR You can connect the COOLPIX995 to a television or VCR to display images on a TV monitor or make a recording on a VCR using the provided video cable. 1 Open the Video output connector/USB connector cover as shown. MODE Video output connector USB connector 2 Connect the video cable provided. • The EN-EL1 rechargeable Li-ion battery can be charged with the EH-21 AC adapter/ battery charger. • The EN-EL1 rechargeable Li-ion battery cannot be charged when it is installed inside the camera. Notes: Connecting the AC adapter • When connecting or removing the AC adapter plug, make sure that the Mode dial is set to . • Use only the Nikon Accessory EH-21 AC adapter/battery charger. • The camera and the AC adapter may become warm when plugged in for a long time. This is not a malfunction. • When taking pictures with the AC adapter connected, make sure that the adapter cord does not get in front of the lens, Speedlight or the flash sync sensor. 154 • Insert the black plug on the video cable into the camera's video output connector, and connect the yellow plug to the video-in jack on the television or VCR. Note that the Video input connector is not the same as the connector used to connect your TV or VCR to an antenna or aerial. • When the Monitor is turned off, shooting (text) information will not be displayed on the television screen. • To prevent the camera from turning off during extended Video viewing or recording, use the optional AC adapter. • Auto Power Off (p. 175) for the Monitor is fixed at 30 minutes when the AC adapter is connected. However, when the video cable is connected, the COOLPIX995 will not turn off automatically and the video output will continue until the camera is turned off manually. • The Video Mode item in the SET-UP menu (p. 135) offers a choice of NTSC and PAL standards for video output. Select a standard that matches that used in your television set. Note that when the PAL video standard is selected, the Monitor will turn off when the camera is connected to a video device. While recording in Ultra HS or Movie mode (p. 99), the Monitor will be used for display and video output will be suspended. 155 Connections