Nikon 25552 User Manual - Page 156

For Connection via Home Wireless LAN Settings Configure* IP Address Descriptions Select [Auto] (default setting) or [Manual] for the method of setting the camera IP address. When [Configure] is set to [Manual], enter the IP address for the camera. Wireless Transfer Mode j Wireless LAN Channels Wireless LAN channels for the COOLPIX S7c are from 1 to 11. Make sure that the channel for your computer's wireless LAN device is set to a channel between 1 and 11 (inclusive). j MAC Address Filtering When MAC address filtering is enabled, only devices with an authorized MAC address can access the wireless LAN. Check the camera's MAC address in [Firmware Version] of the setup menu (c 129) and add it to the authorized list. j Port Number For wireless communication, the UDP port number is "5353" and the TCP port number is "15740". If the computer or access point has a firewall, the firewall settings may need to be changed. l Notes on Profile Devices • Configure profiles for each computer using the Setup Utility and install the Setup Utility to each computer to transfer (receive) pictures from the camera remotely. • You can configure a maximum of nine profile devices (computers, printers connected to a computer, the optional PD-10 wireless printer adapter, etc.) in the camera. If nine have already been configured and you want to add a new one, delete an unneeded profile device using the Setup Utility. • Start the Setup Utility while the camera is connected to a computer via USB cable, and you can rename or delete profiles. Choose [Rename/Delete profiles] in the action selection screen of the Setup Utility and click [Next]. Then choose a profile you wish to rename or delete and click [Rename] or [Delete]. You can also confirm the details of a profile by clicking [View Profile]. Choose [Reset camera] in the action selection screen to delete all profiles 142 (all address book contents are also deleted).