Nikon 25552 User Manual - Page 171

Transferring Pictures j Message Displayed During Transfer The message shown at right is displayed in the monitor during picture transfer. The antenna icon indicates signal strength (5-levels). The icon changes to red when outside the network area. When signal strength is poor, remove any obstacles between the camera antenna and computer (or access point). To cancel the current transfer, press d. Transferring images to computer 0002 / 0004 Cancel j Note on the Camera's d (E) Button Pictures marked with the E icon cannot be transferred in wireless transfer mode using the camera's d (E) button. l Save Location of Transferred Images • Pictures transferred to the computer are saved to the following location. Windows XP: [Wireless Transfer] folder in [My Pictures] folder Macintosh: [Wireless Transfer] folder in [Picture] folder • A destination folder can be changed using the Setup Utility. Choose [Select destination folder] in the screen in step 6 (c 137) and choose a destination folder. Connection between the camera and a computer is not necessary for this operation. • When pictures are transferred wirelessly to a computer that has PictureProject installed, in modes other than [PC mode], PictureProject automatically starts and the transferred pictures will be displayed. Note that the save location can be changed. • For computers without PictureProject installed, Explorer (for Windows) or Finder (for Macintosh) starts and the save location will be displayed. Note that the save location cannot be changed. • If the camera is connected to a computer in [PC mode] without PictureProject installed, drag and drop pictures from the camera icon or drive displayed on the computer to the desired save location. Wireless Transfer Mode 157