Nikon 4804 Instruction Manual - Page 39
Setting up the SB-R200.
UPC - 018208048045
View all Nikon 4804 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Flash operation using the R1C1 AS-20 2 Setting up the SB-R200. 1 Install the battery in the SB-R200 in the same way as No. 3 in "Procedures for close-up flash operation." (p. 30) LOCK 2 Slide the SB-R200's Mounting Foot into the AS-20's Speedlight Mounting Shoe and slide the lock switch. The Mounting Foot cannot be inserted in reverse. • Slide the lock switch until it stops and make sure that the red part can no longer be seen. Group B 4m (13.1ft.) 3 Set up the SB-R200. 3m (9.8ft.) Group C 30˚ 30˚ Commander unit As a basic guide, the effective shooting distance between the Master/ Commander unit and the SB-R200 is approx. 4m (13.1 ft.) or less in the front position, and approx. 3m (9.8 ft.) at both sides. These ranges vary slightly depending on conditions and/or ambient light. Group A 3m (9.8ft.) With the SU-800 • Be sure to place all SB-R200 units that are set in the same group close together. • The set up range of the SB-R200 units vary depending on the Commander unit (camera, Speedlight, etc.) For details, see your Speedlight or camera's instruction manual. • For notes on setting up the SB-R200, see "Setting up the SB-R200" on page 108. 39