Nikon 4804 Instruction Manual - Page 94
Setting a channel number on the SU-800, Setting a group and a channel number on the Speedlight,
![]() |
UPC - 018208048045
View all Nikon 4804 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
6 Repeating (RPT) flash operation Setting a channel number on the SU-800 Press the [SEL](FUNC.) button on the SU-800 to display the channel number (blinking). Press the [] or [] button to change the channel number. Press the [SEL](FUNC.) button once again and the channel number will stop blinking. The last channel number to blink is the one that has been set automatically. • Select one of the four available channels. The same channel number is set for all Groups A, B and C. Setting a group and a channel number on the Speedlight Display when using the SB-800 Set the same channel number as set on the SU-800. • Refer to your Speedlight instruction manual for specific information on settings. Setting the flash mode on each group Firing Firing canceled Press the [SEL](FUNC.) button to display the group (blinking). Press the [MODE] button to set the group to fire or to cancel. 94
![](/manual_guide/products/nikon-su-800-instruction-manual-df6ffc6/94.png)