Nikon 4804 Instruction Manual - Page 50
Setting the Commander function on the camera.
UPC - 018208048045
View all Nikon 4804 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Flash operation using the R1 4 Setting the Commander function on the camera. 1 Set the Commander function on the camera and flash mode on the SB-R200. • Be sure to read the instruction manual of the camera in use. Setting the D70-Series digital camera's Commander mode With a D70-Series camera, go to "19: Flash Mode" from "Custom Settings" and select "Commander Mode." • For more details, see your D70-Series camera instruction manual. Using the IR Panel for Built-in Flash SG-3IR Built-in flash units on cameras such as the D70-Series fire at reduced flash output levels when used as Commander units. This may slightly affect results if pictures are taken from close distances. To prevent this, use the SG-3IR. 1 Attach the SG-3IR to the camera's accessory shoe. 2 Set up the SG-3IR and the built-in flash unit as shown in the illustration. 50