Nikon 4804 Instruction Manual - Page 83

Methods for setting up Set up the Commander and remote flash units in the same way as in "Flash operation using the Nikon Close-up Speedlight Commander Kit R1C1" (p. 38). Items to be set The following items can be set in Commander flash operation. • Flash mode of remote flash units (TTL, AA, M, --- (flash canceled), RPT (repeating) flash) • Group name (A, B, C) • Flash output level compensation (in TTL and AA modes) • Manual flash output level (in M mode) • Manual flash output level, the frequency, the number of repeating flashes per frame (in RPT mode) • Channel number (1, 2, 3, or 4) Flash modes In Commander flash operation, the five flash modes (TTL, AA, M, --- (flash canceled), RPT (repeating)) are available. • Flash modes can be separately set for each group (except RPT). • Available flash modes vary depending on the camera and remote flash units in use. Available flash modes with the SU-800 for remote flash units Flash mode TTL AA*1 M --- (canceled) SB-R200 O X O O SB-800 O O O O SB-600 O X O O *1 Auto Aperture (AA) flash mode is possible only when the SB-800 is used as a remote flash unit in combination with CPU lenses. (A warning indicator appears when the SB-R200 or SB-600 is used in the AA mode.)  Repeating flash operation Repeating (RPT) flash operation is possible when the SU-800 is used with the SB-800 or SB-600 (p. 93).  Lenses In this manual, Nikkor lenses are divided into two types: CPU Nikkor lenses and non-CPU Nikkor lenses. CPU lenses have CPU contacts.  Details on Commander flash operation and shooting procedures 83