Nikon 4804 Instruction Manual - Page 44
Compose the picture and shoot., If the red ready-light blinks immediately after shooting
UPC - 018208048045
View all Nikon 4804 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Procedures for Commander flash operation 6 Compose a picture and shoot with flash. E AB ON L SEL READY LOCK 1 Compose the picture and shoot. Ensure that the red ready-lights on the SU-800 and SB-R200 are on, then release O the shutter. • For details on test firing, refer to page 88. If the red ready-light blinks immediately after shooting SPWEIERDELLIEGSHST R S ON/OFF In TTL mode, when the SB-R200 flash has fired at its maximum output and underexposure may have occurred, the red readylight on the SB-R200 will blink for approx. 3 sec. (The readylights on the SU-800 and in the camera's viewfinder do not blink.) To compensate, move closer to the subject, set a higher ISO sensitivity or use a wider aperture and reshoot. 44
Procedures for Commander flash operation
44
6
Compose a picture and shoot with flash.
1
Compose the picture and shoot.
Ensure that the red ready-lights on the
SU-800 and SB-R200 are on, then release
the shutter.
•
For details on test firing, refer to page 88.
If the red ready-light blinks immediately after shooting
In TTL mode, when the SB-R200 flash has fired at its maximum
output and underexposure may have occurred, the red ready-
light on the SB-R200 will blink for approx. 3 sec. (The ready-
lights on the SU-800 and in the camera’s viewfinder do not
blink.)
To compensate, move closer to the subject, set a higher ISO
sensitivity or use a wider aperture and reshoot.
ON
READY
LOCK
E
L
SEL
A
B
O
ON/OFF
WIRELESS R
SPEEDLIGHT S