Nikon 4804 Instruction Manual - Page 84
Set the Commander's Commander functions.
![]() |
UPC - 018208048045
View all Nikon 4804 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
3 Procedures for Commander flash operation 1 Press the [ON/OFF] buttons to turn on the camera, the Commander and remote flash units. • Ensure that the red ready-lights come on and the flash units have been fully recycled. • Ensure that Wireless flash, Commander mode and CLS-compatible camera indicators are all displayed on the LCD panel. 2 Setting the Commander functions Set the Commander's Commander functions. • Press and hold the [SEL](FUNC.) button for approx. 2 seconds to toggle between the Commander mode and Repeating (RPT) mode. Display in Commander mode 3 Setting the flash mode of the remote flash units Set the remote flash unit's flash mode to TTL, AA, M, or --- (flash canceled). • Press the [SEL](FUNC.) button to display the flash mode (blinking) for each group. Press the [MODE] button to set the flash mode. 4 Setting the flash output level compensation of the remote flash units (in TTL or AA mode) The flash output level compensation values can be set in 1/3 step increments or decrements from +3.0 to -3.0 EV. • Flash output level compensation values can be set separately for each group. • Press the [SEL](FUNC.) button to display the flash output level compensation value (blinking) for the group. Press the [] or [] button to increase or decrease the value. Press the [SEL](FUNC.) button again and the value will stop blinking. The last value to blink is the one that has been set automatically. • The values are displayed in decimal format, like 0.3 for 1/3, and 0.7 for 2/3. • Continuously pressing the [] or [] button quickly increases or decreases the value. • The value blinks during adjustment and stops after blinking six times unless an adjustment is made. The last value to blink is the one that has been set automatically. 84
![](/manual_guide/products/nikon-su-800-instruction-manual-df6ffc6/84.png)