Nikon COOLPIX S8100 S8100 User's Manual - Page 201
Resume - lens error
View all Nikon COOLPIX S8100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 201 highlights
Error Messages Display Problem Solution A P Mode dial is not in the proper position. The mode dial is not set to the correct position. Rotate the mode dial to select the desired mode. 42 u Flash is not fully raised. Flash is held down by fingers and other objects. Do not hold down the flash. 24 Lens error Q Lens error. Turn camera off and then on again. If error persists, contact retailer or Nikon-authorized 22 service representative. P Communications error Error occurred during communication with printer. Turn camera off and reconnect USB cable. 152 System error Q Error has occurred in camera's internal circuitry. Turn camera off, remove and reinsert battery, and turn camera on. If error persists, contact retailer or Nikonauthorized service representative. 12, 17 PR Printer error: check printer status. Printer error. Check printer. After solving the problem, select Resume and press the k button to - resume printing.* Technical Notes and Index PR Printer error: check paper Load the specified paper, Specified size of paper is not loaded in printer. select Resume, and press the k button to resume - printing.* PR Printer error: paper jam Paper has jammed in printer. Remove the jammed paper, select Resume, and press the k button to resume - printing.* PR Printer error: out of paper No paper is loaded in printer. Load the specified paper, select Resume, and press the k button to resume - printing.* PR Printer error: check ink Ink error. Check ink, select Resume, and press the k button to - resume printing.* PR Printer error: out of ink Running out of ink or ink cartridge is empty. Replace ink cartridge, select Resume, and press the k button to resume printing.* - 189