Nikon COOLPIX S9700 Product Manual - Page 148
Connecting the Camera to a Printer, If the PictBridge Startup Screen Is not Displayed
View all Nikon COOLPIX S9700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 148 highlights
Connecting the Camera to a Printer 1 Turn off the camera. 2 Turn on the printer. • Check printer settings. 3 Connect the camera to the printer using the USB cable. • Make sure that the plugs are properly oriented. Do not insert or remove the plugs at an angle when connecting or disconnecting them. Reference Section 4 The camera is automatically turned on. • The PictBridge startup screen (1) is displayed in the camera monitor, followed by the Print selection screen (2). 1 2 Print selection 15/05/2014 No. 32 32 B If the PictBridge Startup Screen Is not Displayed When Auto is selected for Charge by computer (E75), it may be impossible to print images with direct connection of the camera to some printers. If the PictBridge startup screen is not displayed after the camera is turned on, turn the camera off and disconnect the USB cable. Set Charge by computer to Off and reconnect the camera to the printer. E22