Nikon COOLPIX S9700 Product Manual - Page 220

Display No access. Could not connect. Wi-Fi connection terminated. Lens error Communications error System error Cause/Solution A The camera could not receive the communication signal from the smart device. Select Connect to smart device in the Wi-Fi options menu, and wirelessly connect the camera and smart device again. 94, E89 The camera failed to establish the connection while receiving the communication signals from the smart device. Select a different channel in Channel in Options in the Wi-Fi options menu and establish the wireless connection again. 94, E89 A cable was connected to the camera while the camera and smart device were wirelessly connected, the battery level became low, or the connection was aborted due to poor connectivity. Check the status of the camera and establish the wireless connection again. 94, E89 A lens error occurred. Turn the camera off and then on again. If the error persists, contact your retailer or Nikon- 20 authorized service representative. An error occurred while communicating with the printer. Turn the camera off and reconnect the USB cable. E22 An error occurred in the camera's internal circuitry. Turn the camera off, remove and reinsert the battery, and turn the camera on. If the error persists, contact your retailer or Nikonauthorized service representative. 10, 20 Reference Section E94