Nikon R1C1 Wireless Close-Up Speedlight System Users Manual - English - Page 19
Using the SU-800 in low light
View all Nikon R1C1 Wireless Close-Up Speedlight System manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
z Preparation 20 14 19 MODE AB ON/OFF 15 NO AF-ILL SEL 18 READY 17 LOCK 16 Control buttons on the SU-800 14 [ON/OFF] Button Press to turn the power on or off. To avoid accidental firing or a malfunction when carrying the SU-800 in your camera bag, turn off the flash unit. 15 [SEL](FUNC.) button • Press to select the items to be set. The selected item will blink and can be changed using the [W] and [X] buttons. • Press for approx. 2 sec. to display another setting. 16 Target Light Button • Press to turn the Target light (focus-assist illuminator). (p. 89) • Press for approx. 1 sec. to activate or cancel the target light. (p. 90) 17 Test Button Press to test fire the flash. (p. 88) 18 [W] (left) Button [X] (right) Button Press to change the values of the items or settings that are blinking. 19 [MODE] Button Press to set the flash mode. 20 [A B] Select Button In the close-up mode, press to set the flash units in groups A and B to fire or to cancel. MODE NO AF-ILL AB SEL READY ON/OFF LOCK Simultaneously press the [ON/OFF] and [MODE] buttons (two-button reset) to reset all settings (selected by the Commander/Close-up select switch) to their default values. The LCD panel will blink 3 times. Using the SU-800 in low light Press any button on the SU-800 to turn the illuminator on (when the SU-800's power is on), and it will remain lit for about 16 seconds. • The SU-800's control button illuminator comes on when the camera's LCD panel illuminator is turned on. • The control button illuminator goes out when the shutter is released. 19