Nikon R1C1 Wireless Close-Up Speedlight System Users Manual - English - Page 90
Using the Target Light Focus-assist Illuminator
![]() |
View all Nikon R1C1 Wireless Close-Up Speedlight System manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
3 Using the Target Light (Focus-assist Illuminator) By using the Target Light on the SB-R200, you can confirm the direction of flash light emitted. Illuminating and canceling the Target Light using the Target Light button on the SU-800 SEL READY LOCK Press and hold the Target Light button on the SU-800 for more than 1 second, all Target Lights on the SB-R200 units light up. • The Target Light illuminates for 60 seconds and goes out automatically. To cancel the illumination within 60 seconds, press the Target Light button again for more than one second. • Pressing the button twice may be necessary depending on the conditions of the SB-R200. • The Target Light also goes out when: Releasing the shutter Test firing Firing the Modeling Illuminator Pressing the [ON/OFF] button on the SB-R200 Pressing the Target Light button on the SB-R200 Turning on the camera's FV Lock WISRPEELEEDSLISGRHETMSOBT-ER200 ON/OFF WISRPEELEEDSL Illuminating and canceling the Target Light using the Target Light button on the SB-R200 When the Target Light button on the SB-R200 is pressed while the SB-R200's Target Light is off, the Target Light comes on. • If the Target Light is on, the Target light goes out. • The Target Light illuminates for 60 seconds and goes out automatically. To cancel the illumination within 60 seconds, press the Target Light button again. 90
![](/manual_guide/products/nikon-sbr200-wireless-speedlight-users-manual-english-13120fe/90.png)