Nikon R1C1 Wireless Close-Up Speedlight System Users Manual - English - Page 35
Setting a channel number on the SU-800 and, SB-R200.
View all Nikon R1C1 Wireless Close-Up Speedlight System manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
z Flash operation using the R1C1 7 Setting a channel number on the SU-800 and SB-R200. CHANNEL 34 2 1 1 Set a channel number on the SU-800. Press the [SEL](FUNC.) button to display channel number (blinking). Press the [W] or [X] button to change the channel number. Press the [SEL](FUNC.) button again and the channel number will stop blinking. The last channel number to blink is the one that has been set automatically. • Select one of the four available channels. • The channel number blinks during adjustment and stops after blinking six times unless an adjustment is made. The last channel number to blink is the one that has been set automatically. 2 Set a channel number on the SB-R200. Rotate the [CHANNEL] select dial on the SB-R200 to set the same channel number as set on the SU-800. 35