Nikon S51c S51c Public Wireless LAN Connection Guide - Page 18

Connect the AC adaptor to the camera to upload all pictures - firmware

Page 18 highlights

Connect the AC adaptor to the camera to upload all pictures Picture Bank offers two options for uploading pictures. Upload selected pictures to the server (as described on pages 5 to 15), or initiate upload of all pictures when the AC adapter is connected to the camera. This section introduces connection to my Picturetown and upload of all pictures, initiated with connection of the AC adapter, via a home wireless LAN. Infrastructure mode, which utilizes an access point, is required to use a home wireless LAN. For more information on configuring a network profile for home wireless LAN, see page 126 of the User's Manual. Upload all pictures! Battery charge begins after picture upload! Take pictures... Connect the AC adapter... This section describes a home wireless LAN for which the only security applied is encryption with a WEP key. Configure home wireless LAN settings at a location that is physically near the access point. Home Wireless LAN Settings • If the access point does not allow connection by any wireless device, or if MAC address filtering is enabled, modify access point settings to allow connection by any wireless device and configure the camera's MAC address with the access point. Refer to "Firmware version" on page 119 of the User's Manual. • Home wireless LAN configuration can vary from one user to another. If authentication or another type of encryption is enabled, refer to "Configuring Wireless LAN Settings from the Camera" on page 126 and "Configuring Wireless LAN Settings from the Utility" on page 136 of the User's Manual to apply the appropriate settings for the home wireless LAN. • For more information on home wireless LANs, refer to other commercially available references on wireless LAN. 18

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24

18
Connect the AC adaptor to the camera to
upload all pictures
Picture Bank offers two options for uploading pictures. Upload selected pictures to the
server (as described on pages 5 to 15), or initiate upload of all pictures when the AC
adapter is connected to the camera.
This section introduces connection to my Picturetown and upload of all pictures, initi-
ated with connection of the AC adapter, via a home wireless LAN. Infrastructure
mode, which utilizes an access point, is required to use a home wireless LAN. For more
information on configuring a network profile for home wireless LAN, see page 126 of
the
User’s Manual
.
This section describes a home wireless LAN for which the only security applied is en-
cryption with a WEP key. Configure home wireless LAN settings at a location that is
physically near the access point.
Home Wireless LAN Settings
• If the access point does not allow connection by any wireless device, or if MAC ad-
dress filtering is enabled, modify access point settings to allow connection by any
wireless device and configure the camera’s MAC address with the access point. Re-
fer to “Firmware version” on page 119 of the
User’s Manual
.
• Home wireless LAN configuration can vary from one user to another. If authenti-
cation or another type of encryption is enabled, refer to “Configuring Wireless LAN
Settings from the Camera” on page 126 and “Configuring Wireless LAN Settings
from the Utility” on page 136 of the
User’s Manual
to apply the appropriate set-
tings for the home wireless LAN.
• For more information on home wireless LANs, refer to other commercially available
references on wireless LAN.
Upload all pictures!
Take pictures...
Connect the AC
adapter...
Battery charge begins
after picture upload!