Nikon SB-26 Instruction Manual - Page 40
For FA, FE2, FG and Nikonos V Users
![]() |
UPC - 018208047079
View all Nikon SB-26 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
1 Choose p position (flash mode selector). Confirm H in the LCD panel. 2 Choose W position* (flash sync mode selector). * Since TTL Auto Flash operation can be performed regardless of the flash sync mode selector setting, for simplicity, always leave the switch at this position. Setting Up Your Camera 5 Set desired shutter speed*. * Camera automatically shifts to the fastest synchronization speed if you choose a speed that is not within the synchronization range. 6 Set your chosen aperture. 3 Set ISO speed of the film in use. Usable film speeds are from ISO 25 to ISO 400 For instruction, see "Setting ISO Film Speed (Manual Adjustment)," pages 27 to 28. 4 Set position of the built-in zoom head. For instruction, see "Setting Zoom-Head Position (Manual Adjustment)," pages 29 to 30. Shooting indicator bars / in the LCD panel move as the figure input changes. 78 Confirm Settings Chapter 3 TTL Auto Flash H Mode: For FA, FE2, FG and Nikonos V Users 7 Set aperture in use. For instruction, see "Setting Aperture Value (Manual Adjustment)," pages 28 to 29. Shooting indicator bars / in the LCD panel move as the figure input changes. Determine approximate flash-shooting distance range by reading indicator bars. 8 Look into camera viewfinder, compose and lightly press the shutter release button. Confirm ready-light has come on and subject is in focus. Check if ready-light is on in camera's viewfinder g or on the SB-26 Â. Quick reference on relationship between usable apertures and flash shooting distance Use table on page 146 in this instruction manual. 79
![](/manual_guide/products/nikon-sb26-instruction-manual-8a6c55e/40.png)