Nikon SB-26 Instruction Manual - Page 5

Nomenclature Built-in diffuser card Built-in wide flash adapter Wireless Slave Flash selector Red-Eye Reduction lamp Battery chamber lid Slide and lift to open. Flash head tilting lock release lever Meter/Feet select lever (inside battery chamber) Battery chamber Accepts four 1.5V AA-type penlight batteries, either 1.5V alkaline-manganese or 1.2V NiCd batteries (voltage for NiCd batteries varies depending on manufacturer; maximum permitted is 1.5V). 8 Flash head Locks at the front position and the 90˚ position; tilts up to 90° and down to -7°; rotates 90° to the right and 180° to the left. Wireless Slave Flash sensor Autofocus assist illuminator LED Enables autofocus operation in dim light or total darkness. Light sensor for Non-TTL Auto Flash operation In Non-TTL Auto Flash operation, be careful not to cover or otherwise obstruct the sensor. S DSOFBF-26 External power source terminal Accepts power cord of Nikon DC unit SD-8/SD-7, or Power Bracket Unit SK-6. Mounting foot locking wheel Mount pin Hot-shoe contacts Mounting foot Tilting angle scale Rotating angle scale Terminal cover Keep terminal covered when not in use. TTL multiple flash terminal For TTL-exposure-control multiple flash operation. Sync/multiple flash terminal For manual-exposure multiple flash operation. Chapter 1 Flash head rotating lock release lever LCD panel See page 26. Control buttons See page 26. 9